Speed of Sound Calculator
Calculate speed sound with our free science calculator. Uses standard scientific formulas with unit conversions and explanations.
Formula
v = 331.3 + 0.606T (air, in m/s)
For air, the speed of sound in meters per second equals 331.3 plus 0.606 times the temperature in degrees Celsius. For other media, the speed depends on the material's bulk modulus (stiffness) and density: v = sqrt(B/rho) for fluids and v = sqrt(E/rho) for solids.
Worked Examples
Example 1: Lightning Distance
Problem: You see a lightning flash and hear thunder 6 seconds later. The air temperature is 25 degrees C. How far away was the lightning?
Solution: Speed of sound at 25C = 331.3 + 0.606 x 25 = 346.45 m/s\nDistance = speed x time = 346.45 x 6 = 2,078.7 m\nDistance = 2.079 km (about 1.29 miles)\n\nQuick estimate: 6 / 3 = 2 km (within 4% of exact)
Result: Distance: 2,079 meters (2.08 km) | Speed of Sound: 346.45 m/s
Example 2: Concert Hall Acoustics
Problem: A concert hall is 50 meters long. At 22 degrees C, what is the delay between sound from the stage and its reflection from the back wall?
Solution: Speed at 22C = 331.3 + 0.606 x 22 = 344.63 m/s\nRound trip = 2 x 50 = 100 m\nDelay = 100 / 344.63 = 0.290 seconds = 290 ms\n\nThis delay is audible (> 50ms threshold) and would cause a distinct echo if not treated with acoustic absorption.
Result: Echo Delay: 290 ms | Speed: 344.63 m/s | Echo is clearly audible
Frequently Asked Questions
What determines the speed of sound in air?
The speed of sound in air is primarily determined by the air temperature, with the relationship described by the formula v = 331.3 + 0.606T, where T is the temperature in degrees Celsius. At 0 degrees Celsius the speed is approximately 331.3 meters per second, and at 20 degrees it is about 343.2 meters per second. Humidity has a small effect, increasing speed slightly because water vapor is less dense than dry air. Air pressure has negligible effect because while higher pressure increases the restoring force, it also increases the density proportionally, and these effects cancel out. Wind can add or subtract from the effective speed depending on direction.
Why does sound travel faster in water than in air?
Sound travels approximately 4.3 times faster in water (about 1,482 m/s at 20 degrees C) than in air (about 343 m/s) because water is much more incompressible than air while being only about 800 times denser. The speed of sound depends on the square root of the bulk modulus (stiffness) divided by density, and water's bulk modulus is over 15,000 times greater than air's. This large stiffness advantage more than compensates for the higher density. The same principle explains why sound travels even faster in solids like steel (5,960 m/s) where atomic bonds create extremely high stiffness. Marine mammals like dolphins exploit water's efficient sound transmission for communication over many kilometers.
How does temperature affect the speed of sound and why?
Higher temperatures increase the speed of sound because temperature is a measure of the average kinetic energy of air molecules. Faster-moving molecules transmit pressure disturbances more quickly, acting like more responsive springs in the medium. The relationship is approximately linear for normal temperature ranges: each degree Celsius increase adds about 0.606 meters per second to the speed. This effect creates temperature inversions in acoustics where sound can bend toward or away from the ground depending on the temperature gradient. On hot days, the ground layer is warmer and sound bends upward, making distant sounds harder to hear. On cold nights, the reverse occurs and sounds carry much farther.
How is the speed of sound measured in practice?
The speed of sound can be measured using several methods. The simplest involves timing an echo: create a loud sound near a large flat surface, measure the round-trip time, and divide twice the distance by the time. More precise laboratory methods use resonance tubes where a speaker generates standing waves at known frequencies, and the speed is calculated from the wavelength and frequency using v = f times lambda. Modern instruments use ultrasonic transducers that emit and detect high-frequency pulses with nanosecond precision. In gases, the Kundt tube method uses fine powder to visualize standing wave patterns. For field measurements, synchronized microphones at known distances apart can time the arrival of sound impulses with high accuracy.
What is the relationship between speed of sound, frequency, and wavelength?
The speed of sound equals frequency times wavelength, expressed as v = f times lambda. This means that for a given speed of sound, higher frequencies have shorter wavelengths and lower frequencies have longer wavelengths. In air at 20 degrees C (343 m/s), a 1,000 Hz tone has a wavelength of 34.3 centimeters, while a 20 Hz bass tone has a wavelength of 17.15 meters and a 20,000 Hz tone has a wavelength of just 1.72 centimeters. This relationship is critical for acoustics design because wavelength determines how sound interacts with obstacles: sound waves diffract around objects smaller than their wavelength and are reflected by objects larger than their wavelength.
How does the speed of sound vary in different solids and liquids?
The speed of sound varies dramatically across materials based on their stiffness and density. In solids, speeds range from about 1,000 m/s in rubber to over 12,000 m/s in diamond. Common values include steel at 5,960 m/s, aluminum at 6,420 m/s, glass at 5,640 m/s, concrete at 3,400 m/s, and hardwood at 3,850 m/s. In liquids, fresh water conducts sound at about 1,482 m/s at 20 degrees C, seawater at about 1,533 m/s (faster due to dissolved salts), and mercury at 1,450 m/s. These differences are exploited in engineering applications such as ultrasonic testing of materials, sonar navigation, and seismic exploration for oil and minerals.