Significant Wave Height Calculator
Compute significant wave height using validated scientific equations. See step-by-step derivations, unit analysis, and reference values.
Formula
Hs = 0.283(U2/g) tanh[0.0125(gF/U2)^0.42]
Where Hs is significant wave height, U is wind speed (m/s), g is gravitational acceleration (9.81 m/s2), and F is fetch length (m). This is the SMB (Sverdrup-Munk-Bretschneider) fetch-limited formula. A similar duration-limited formula is also computed and the lower value is used.
Worked Examples
Example 1: Open Ocean Wind Waves
Problem: Calculate significant wave height for 15 m/s wind speed, 200 km fetch, 12-hour duration, and 100 m water depth.
Solution: Using SMB equations:\nHs (fetch-limited) = 0.283 x (15^2/9.81) x tanh(0.0125 x (9.81 x 200000/225)^0.42)\nHs (duration-limited) = 0.283 x (15^2/9.81) x tanh(0.077 x (9.81 x 43200/15)^0.25)\nHs = min(fetch, duration) value\nDepth limit = 0.6 x 100 = 60 m (not limiting)\nPeak period and wavelength follow from similar SMB relations
Result: Significant Wave Height: ~3.2 m | Peak Period: ~7.5 s | Wave Power: ~45 kW/m
Example 2: Coastal Shallow Water Assessment
Problem: Evaluate waves in 10 m water depth with 20 m/s wind, 50 km fetch, and 6-hour duration.
Solution: Hs (fetch-limited) from SMB for short fetch\nHs (duration-limited) from SMB for short duration\nHs = min of both values\nDepth limit check: 0.6 x 10 = 6.0 m maximum\nIf calculated Hs > 6.0 m, wave is depth-limited at 6.0 m\nWave breaking will occur, dissipating energy
Result: Depth-limited waves: max 6.0 m | Breaking conditions likely | Reduced wave period
Frequently Asked Questions
What is significant wave height and why is it important?
Significant wave height (Hs or H1/3) is defined as the average height of the highest one-third of all waves in a given wave record. It was originally developed because it closely matches what an experienced observer would estimate as the wave height by eye. Significant wave height is the most widely used wave parameter in ocean engineering, coastal design, marine forecasting, and offshore operations. It is used to design offshore platforms, determine safe operating conditions for ships and marine operations, calculate coastal erosion rates, and plan harbor construction. Most wave forecasts and buoy measurements report significant wave height.
How does wind speed affect wave height?
Wind speed is the primary driver of wave generation. Wave height increases roughly proportional to the square of wind speed for fully developed seas, meaning doubling wind speed can quadruple wave height. However, waves also depend on fetch (distance over which wind blows) and duration (how long the wind has been blowing). At low wind speeds of 5 to 10 m/s, significant wave heights are typically 0.5 to 2 meters. At 15 to 20 m/s (strong wind), waves reach 3 to 6 meters. Hurricane-force winds above 33 m/s can generate waves exceeding 15 meters. The relationship is not perfectly quadratic because wave growth slows as waves become large and energy dissipation through whitecapping increases.
What is fetch and how does it influence wave generation?
Fetch is the unobstructed distance over water that wind blows in a roughly constant direction. Longer fetch produces larger waves because wind has more distance to transfer energy to the water surface. In enclosed water bodies like lakes, fetch is limited by the shoreline geometry, resulting in smaller waves even during strong winds. Open ocean storms can have fetch distances of hundreds or thousands of kilometers, generating large swells. When fetch is the limiting factor (rather than wind duration), conditions are called fetch-limited. The calculator uses the SMB (Sverdrup-Munk-Bretschneider) method which accounts for both fetch and duration limitations on wave growth.
How does water depth affect wave height?
Water depth limits maximum wave height through a physical process called depth-limited breaking. As waves enter shallow water, they slow down and increase in height until they become unstable and break. The maximum stable wave height in shallow water is approximately 0.6 to 0.78 times the water depth, depending on the seabed slope and wave period. In deep water (depth greater than half the wavelength), depth has minimal effect on wave height. The transition zone where depth begins to affect waves is called intermediate depth. This depth limitation is critical for coastal engineering because it determines the maximum wave forces that structures in shallow water will experience.
What is wave period and how does it relate to wavelength and energy?
Wave period (T) is the time between successive wave crests passing a fixed point, measured in seconds. The peak period (Tp) is the period of the most energetic waves in a spectrum. Wavelength (L) is related to period through the deep water dispersion relation: L = g T squared / (2 pi), where g is gravitational acceleration. Wave energy is proportional to the square of wave height, while wave power (energy flux) is proportional to both wave height squared and wave period. This means long-period swell waves carry substantially more energy than short-period wind waves of the same height, which is why distant storm swell can cause significant coastal damage.
What is the maximum wave height and how does it compare to significant wave height?
The maximum individual wave height in a sea state is statistically related to the significant wave height. For a typical 3-hour storm duration with periods of about 10 seconds (roughly 1,000 waves), the expected maximum wave height is approximately 1.86 times the significant wave height. This means that if Hs is 5 meters, the largest individual wave could be about 9.3 meters. The ratio depends on the number of waves in the record: more waves mean a higher expected maximum. Rogue waves, which exceed 2.2 times Hs, occur more frequently than traditional linear wave theory predicts and have been confirmed by ocean buoys and ship encounters.