Sheep Feed Calculator
Calculate daily feed and nutrition requirements for sheep by weight and production stage. Enter values for instant results with step-by-step formulas.
Formula
DMI (kg/day) = Body Weight (kg) x DMI% / 100
Daily dry matter intake is calculated by multiplying the sheep body weight by the appropriate DMI percentage for its production stage. Feed quantities are then distributed according to the forage-grain-supplement ratio and converted to as-fed weights.
Worked Examples
Example 1: Lactating Ewe Flock Feed Plan
Problem: Calculate daily feed for 25 lactating ewes (70 kg each) in early lactation, with 60% hay, 30% grain, 10% supplement. Hay $0.15/kg, grain $0.35/kg, supplement $0.80/kg.
Solution: DMI per head: 70 kg x 3.5% = 2.45 kg DM/day\nHay (as-fed): 2.45 x 0.60 / 0.90 = 1.63 kg\nGrain (as-fed): 2.45 x 0.30 / 0.88 = 0.84 kg\nSupplement (as-fed): 2.45 x 0.10 / 0.92 = 0.27 kg\nCost/head/day: (1.63 x $0.15) + (0.84 x $0.35) + (0.27 x $0.80) = $0.76\nFlock daily: $0.76 x 25 = $19.00
Result: DMI: 2.45 kg/head/day | Daily Flock Cost: $19.00 | Monthly: $570.00
Example 2: Growing Lamb Ration
Problem: Calculate feed for 50 growing lambs at 35 kg body weight, 50% hay and 40% grain, 10% supplement.
Solution: DMI per head: 35 kg x 4.0% = 1.40 kg DM/day\nHay: 1.40 x 0.50 / 0.90 = 0.78 kg\nGrain: 1.40 x 0.40 / 0.88 = 0.64 kg\nSupplement: 1.40 x 0.10 / 0.92 = 0.15 kg\nCP required: 1.40 x 16% = 224 g/day\nWater: 1.40 x 2.1 = 2.9 L/day
Result: DMI: 1.40 kg/head/day | CP: 224 g | Water: 2.9 L/head/day
Frequently Asked Questions
How much feed does a sheep need per day based on body weight?
A sheep typically consumes between 2.0 and 4.0 percent of its body weight in dry matter intake daily, depending on its production stage. A 70 kg maintenance ewe needs approximately 1.4 kg of dry matter per day, while a lactating ewe of the same weight requires 2.45 kg or more. Growing lambs have the highest relative intake at 3.5 to 4.5 percent of body weight because they need extra nutrients for muscle and skeletal development. Factors affecting daily intake include forage quality, ambient temperature, water availability, and health status. During extreme cold, energy requirements can increase by 10 to 30 percent, necessitating additional feed supplementation beyond normal rations.
What are the protein requirements for sheep at different production stages?
Protein requirements vary significantly across production stages and directly impact animal performance and health. Maintenance ewes require about 8 percent crude protein in their diet, which is easily met by average-quality grass hay. Late gestation ewes carrying twins need 13 percent crude protein to support fetal growth and avoid pregnancy toxemia. Early lactation demands peak protein at 14 to 15 percent crude protein because milk production requires substantial amino acids for casein and whey synthesis. Growing lambs need 14 to 16 percent crude protein to support their rapid growth rates of 200 to 400 grams per day. Insufficient protein leads to reduced milk production, poor lamb growth, decreased wool quality, and increased susceptibility to parasites.
What is the ideal forage to grain ratio for feeding sheep?
The ideal forage-to-grain ratio depends on the production stage and the quality of available forage. For maintenance ewes, a diet of 80 to 100 percent forage is adequate when hay quality is reasonable with at least 8 percent crude protein. During late gestation and lactation, increasing grain to 30 to 40 percent of the diet provides necessary energy density that bulky forage alone cannot deliver. Finishing lambs may receive 60 to 70 percent grain for maximum growth rates, but this must be introduced gradually over 2 to 3 weeks to prevent acidosis. A general rule is to never change the grain portion by more than 10 percent of the diet per week. Abrupt dietary changes can cause potentially fatal digestive disorders in ruminants.
How much water do sheep need daily and what affects consumption?
Sheep require approximately 2 to 4 liters of clean water per kilogram of dry matter consumed, translating to roughly 4 to 12 liters per head per day for most adult sheep. Lactating ewes need the most water, often consuming 8 to 15 liters daily because milk production requires significant water volume. Temperature dramatically affects water intake: sheep may double their consumption when temperatures exceed 32 degrees Celsius compared to moderate conditions. Water quality matters as well because high salt content, bacterial contamination, or algae blooms can reduce voluntary intake and impair animal health. Sheep consuming lush green pasture with high moisture content will drink less supplemental water than those eating dry hay exclusively.
What minerals and supplements are essential for sheep nutrition?
Sheep require several essential minerals that are often deficient in forage-only diets. Calcium and phosphorus are needed in a ratio of approximately 2:1, with requirements ranging from 3 to 8 grams of calcium and 2 to 5 grams of phosphorus daily depending on production stage. Selenium deficiency causes white muscle disease in lambs and reproductive problems in ewes, and supplementation is critical in selenium-deficient regions. Copper is unique in sheep nutrition because they are highly sensitive to copper toxicity, and sheep-specific mineral mixes should never be substituted with cattle minerals which contain higher copper levels. Salt should be provided free-choice at approximately 0.5 percent of the diet. Vitamin E supplementation is important during late gestation and for lambs, particularly when feeding stored forages.
What formula does Sheep Feed Calculator use?
The formula used is described in the Formula section on this page. It is based on widely accepted standards in the relevant field. If you need a specific reference or citation, the References section provides links to authoritative sources.