Shed Roof Calculator
Calculate shed roof dimensions, materials, and pitch from shed width and desired overhang. Enter values for instant results with step-by-step formulas.
Formula
Rafter = sqrt(Run^2 + Rise^2) | Roof Area = 2 x Rafter x Length (gable) | Squares = Area / 100
The rafter length is found using the Pythagorean theorem where Run is half the shed width and Rise is Run times the pitch ratio. Roof area is the rafter length (plus overhang) times the effective shed length (plus overhang), doubled for gable roofs. One roofing square equals 100 square feet.
Worked Examples
Example 1: 10x12 Gable Shed Roof
Problem: Calculate materials for a 10 ft wide x 12 ft long shed with a gable roof at 4/12 pitch and 12-inch overhang. Shingle bundles cost $30 each.
Solution: Run = 10/2 = 5 ft, Rise = 5 x 4/12 = 1.67 ft\nRafter = sqrt(25 + 2.78) = 5.27 ft + 1 ft overhang = 6.27 ft\nEffective length = 12 + 2(1) = 14 ft\nRoof area = 2 x 6.27 x 14 = 175.6 sq ft\nWith 15% waste = 201.9 sq ft = 2.02 squares\nBundles needed = 7 (3 per square, rounded up)\nCost = 7 x $30 = $210
Result: 175.6 sq ft roof area | 7 shingle bundles ($210) | 6 plywood sheets | ~$620 total materials
Example 2: 8x10 Single-Slope Shed Roof
Problem: Calculate the roof area and materials for an 8 ft wide x 10 ft long lean-to shed with a 3/12 pitch.
Solution: Rise = 8 x 3/12 = 2 ft\nRafter = sqrt(64 + 4) = 8.25 ft + 1 ft overhang = 9.25 ft\nEffective length = 10 + 2(1) = 12 ft\nRoof area = 9.25 x 12 = 111 sq ft\nWith 15% waste = 127.7 sq ft = 1.28 squares\nBundles = 4, Plywood sheets = 4
Result: 111 sq ft roof area | 4 shingle bundles ($120) | 4 plywood sheets | ~$385 total materials
Frequently Asked Questions
How do I calculate the roof area for a shed?
Shed roof area calculation depends on the roof style. For a gable roof (two sloped sides meeting at a ridge), calculate the rafter length using the Pythagorean theorem: Rafter = square root of (Run squared + Rise squared), where Run is half the shed width and Rise is Run times pitch divided by 12. Then multiply: Area = 2 x Rafter Length x Shed Length. For a single-slope (lean-to) shed roof, the rafter spans the full width, so Area = Rafter Length x Shed Length. Add overhang dimensions to both rafter length and shed length before calculating. Finally, add 10 to 15 percent for waste when estimating materials. A steeper pitch means more roof area for the same footprint.
What roof pitch is best for a shed?
The ideal roof pitch for a shed depends on your climate and roofing material. A 4/12 pitch (4 inches of rise per 12 inches of run) is the most common for sheds because it provides adequate water and snow runoff while keeping the overall height reasonable. Minimum pitches vary by material: asphalt shingles require at least 2/12 (some manufacturers require 4/12 for warranty), metal roofing can go as low as 1/2 per 12, and rolled roofing works at 1/12 minimum. In heavy snow areas, a 6/12 or steeper pitch prevents dangerous snow loads. For hot climates where rain is the main concern, 3/12 to 4/12 is sufficient. Steeper pitches add material cost and construction complexity but improve the shed appearance and match most house roof styles.
How many shingle bundles do I need for a shed roof?
Shingle quantity is calculated in squares, where one square covers 100 square feet of roof area. Three bundles of standard three-tab shingles cover one square. Calculate your total roof area including overhangs, add 10 to 15 percent for waste (starter strips, ridge caps, and cutting around edges), then divide by 100 to get squares, and multiply by 3 for bundles. For example, a 10x12 gable shed with a 4/12 pitch has roughly 270 square feet of roof area. With 15 percent waste: 270 x 1.15 = 310 sq ft = 3.1 squares = 10 bundles. Architectural (dimensional) shingles may require 4 to 5 bundles per square depending on the brand. Always round up and buy an extra bundle for future repairs.
Should I use plywood or OSB for shed roof sheathing?
Both plywood and OSB (Oriented Strand Board) are acceptable for shed roof sheathing, with each having distinct advantages. Plywood is stronger, more moisture-resistant, and holds nails better, making it the premium choice. It performs better when edges get wet and recovers its structural integrity after drying. OSB costs 15 to 25 percent less than plywood and comes in larger sheets (up to 8x24 feet), which can speed installation. However, OSB swells significantly when exposed to moisture and does not recover well, making it a poor choice for sheds in humid climates or those without gutters. For most shed projects, 7/16-inch OSB or 1/2-inch CDX plywood is sufficient for 16-inch rafter spacing. If rafters are spaced 24 inches apart, use 5/8-inch material for adequate load support.
How much overhang should a shed roof have?
Standard shed roof overhang (also called eave projection) is 6 to 12 inches, with 12 inches being the most common recommendation. Overhang protects the shed walls from rain runoff and directs water away from the foundation. In rainy climates, 12 to 18 inches of overhang provides better wall protection. In arid climates, 6 to 8 inches is often sufficient. On the gable ends (the triangular sides), 6 to 12 inches of overhang is typical, using rake boards or lookout framing. The overhang on the gable end is usually equal to or less than the eave overhang for proportional appearance. Keep in mind that every inch of overhang adds to your total roof area and material cost. Wider overhangs may also require additional support through lookout rafters or extended structural members.
What underlayment should I use under shed roof shingles?
The most common shed roof underlayment is 15-pound or 30-pound asphalt-saturated felt paper (tar paper). Fifteen-pound felt is lighter and easier to work with, making it popular for DIY shed projects. Thirty-pound felt is thicker, more durable, and provides better protection, making it preferable in areas with high wind or heavy rain exposure. Synthetic underlayment is a newer alternative that is lighter, stronger, and more tear-resistant than felt, though it costs two to three times more. For sheds in cold climates, install ice and water shield membrane along the eaves (the first 24 inches from the edge) to prevent ice dam leakage. The underlayment provides a secondary waterproof barrier under the shingles, protecting the roof deck from wind-driven rain and condensation.