Jerib to Square Meter Converter
Free Jerib square meter tool for afghan & regional. Enter your details to get instant, tailored results and guidance.
Formula
Converted Value = Input Value × (From Unit in m²) / (To Unit in m²)
All land units are converted through square meters as the base unit. 1 Jerib = 2,000 m², 1 Biswa = 100 m² (20 Biswas per Jerib), 1 Hectare = 10,000 m², 1 Acre = 4,046.86 m². Multiply the input by the source unit's square meter equivalent, then divide by the target unit's square meter equivalent.
Worked Examples
Example 1: Farm Size Conversion
Problem: A farmer in Baghlan province has 15 Jeribs of agricultural land. Convert this to hectares, acres, and square meters.
Solution: Square meters = 15 × 2,000 = 30,000 m²\nHectares = 30,000 / 10,000 = 3.0 ha\nAcres = 30,000 / 4,046.86 = 7.41 acres
Result: 15 Jeribs = 30,000 m² = 3.0 hectares = 7.41 acres
Example 2: Residential Plot Conversion
Problem: A residential plot in Kabul is listed as 4 Biswas. Convert to square meters, square feet, and Jeribs.
Solution: Square meters = 4 × 100 = 400 m²\nSquare feet = 400 / 0.0929 = 4,305.56 ft²\nJeribs = 400 / 2,000 = 0.2 Jerib
Result: 4 Biswas = 400 m² = 4,306 ft² = 0.2 Jerib
Frequently Asked Questions
What is a Jerib and how is it used in Afghanistan?
A Jerib (also spelled Jeribi or Djerib) is a traditional unit of land measurement widely used in Afghanistan, particularly for agricultural land and property transactions. One Jerib equals 2,000 square meters or approximately 0.2 hectares (about half an acre). The Jerib has been the standard unit of land measurement in Afghanistan for centuries and remains the primary unit used in rural areas, government land records, and property deeds. When Afghans discuss farm sizes, orchard areas, or property plots, they almost universally use the Jerib rather than metric or imperial units. Understanding Jerib measurements is essential for anyone involved in Afghan real estate or agriculture.
What is a Biswa and how does it relate to a Jerib?
A Biswa is a smaller traditional land measurement unit used in Afghanistan and parts of South Asia. In the Afghan system, one Biswa equals 100 square meters, which means there are exactly 20 Biswas in one Jerib (since 1 Jerib = 2,000 square meters). The Biswa is commonly used for smaller plots of land, residential properties, and urban measurements where a full Jerib would be too large a unit. In some regions, particularly in provinces bordering Pakistan, the Biswa measurement may vary slightly due to local customs, but the standard Afghan Biswa of 100 square meters is the most widely accepted. When buying or selling small plots, Afghans typically express the area in Biswas for precision.
Are there regional variations in the Jerib measurement across Afghanistan?
While the standard Afghan Jerib is officially defined as 2,000 square meters, some regional variations do exist in practice. In certain provinces, local customs may define the Jerib slightly differently based on historical usage, though the 2,000 square meter standard is recognized by the Afghan government and used in official land records. In areas bordering Iran, the Jerib may be influenced by the Iranian measurement system. In eastern provinces near Pakistan, the Kanal and Marla systems may be used alongside or instead of the Jerib. When conducting land transactions, it is always advisable to verify the local definition of measurement units and confirm the actual area through independent surveying.
How do I interpret the result?
Results are displayed with a label and unit to help you understand the output. Many calculators include a short explanation or classification below the result (for example, a BMI category or risk level). Refer to the worked examples section on this page for real-world context.
Can I use Jerib to Square Meter Converter on a mobile device?
Yes. All calculators on NovaCalculator are fully responsive and work on smartphones, tablets, and desktops. The layout adapts automatically to your screen size.
Is my data stored or sent to a server?
No. All calculations run entirely in your browser using JavaScript. No data you enter is ever transmitted to any server or stored anywhere. Your inputs remain completely private.