Garage Door Size Calculator
Determine the right garage door size for single, double, or RV garage openings. Enter values for instant results with step-by-step formulas.
Formula
Recommended Width = Vehicle Width + Side Clearance; Recommended Height = Vehicle Height + Top Clearance
Garage door sizing requires adding adequate clearance to vehicle dimensions. Minimum side clearance is 6 inches per side (12 inches total), and top clearance should be at least 6 to 12 inches. Rough opening dimensions add sideroom for tracks (3+ inches) and headroom for springs (10-15 inches).
Worked Examples
Example 1: Two-Car Garage with SUVs
Problem: A homeowner has two SUVs (each about 6.5 ft wide, 5.8 ft tall) and needs to determine the right double garage door size. Current rough opening is 16.5 ft wide by 8 ft tall.
Solution: Vehicle width: 6.5 ft x 2 vehicles = 13 ft minimum\nAdd clearance: 6 in each side + 12 in between = 2 ft\nMinimum width: 13 + 2 = 15 ft\nStandard recommendation: 16 ft wide (standard double)\nHeight: 5.8 ft vehicle + 1.2 ft clearance = 7 ft (standard)\nRough opening needs: 16 ft + 3 in sides, 7 ft + 12 in headroom
Result: Recommended: 16 ft x 7 ft double door | Both SUVs fit with 1.5 ft total side clearance
Example 2: RV Garage Door Sizing
Problem: An RV owner needs a garage door for a Class C motorhome that is 8 ft wide and 10.5 ft tall. What size door is needed?
Solution: Vehicle width: 8 ft + minimum 2 ft clearance = 10 ft minimum\nVehicle height: 10.5 ft + 1 ft clearance = 11.5 ft minimum\nNearest standard sizes: 12 ft wide x 12 ft tall\nRough opening: 12.25 ft wide x 13 ft tall (with 12 in headroom)\nBackroom needed: 12 ft door height + 18 in = 13.5 ft
Result: Recommended: 12 ft x 12 ft door | Side clearance: 2 ft each side | Top clearance: 1.5 ft
Frequently Asked Questions
What is the standard size for a single-car garage door?
The most common standard single-car garage door size is 8 feet wide by 7 feet tall, though 9-foot wide doors have become increasingly popular in newer construction to accommodate wider modern vehicles. Some builders use 10-foot wide single doors for extra clearance. The 7-foot height works well for sedans, crossovers, and most SUVs, but if you drive a lifted truck or tall vehicle, you may want to consider an 8-foot tall door instead. When ordering a door, the dimensions refer to the actual door size, not the rough opening. The rough opening should be slightly larger than the door to allow for track hardware and weather sealing on the sides and top.
What size garage door do I need for a double garage?
Standard double-car garage doors are typically 16 feet wide by 7 feet tall, providing enough room for two vehicles to park side by side. Some homeowners prefer 14-foot wide double doors, though this can feel tight with two larger vehicles. For homes with wider garages, 18-foot doors are available but may require special ordering. An alternative to a single double-wide door is two separate single-car doors, which offers advantages including independent operation, better wind resistance, and less visual bulk on the home facade. Two single doors also mean that if one door breaks, you still have access through the other bay.
What garage door size is needed for an RV or motorhome?
RVs and motorhomes require substantially larger garage doors than standard vehicles, typically 12 to 16 feet wide and 12 to 14 feet tall depending on the RV class. Class A motorhomes can be up to 8.5 feet wide and 12 feet tall, so a minimum door size of 10 feet wide by 12 feet tall is essential, though 12 by 14 feet is much more comfortable. Class C motorhomes and large fifth wheels need at least 10 by 12 feet. Travel trailers and Class B vans can often fit through a 9 by 10 foot opening. Check your specific RV dimensions including any rooftop accessories like air conditioners or antennas that add height. Always add at least 12 inches of clearance on each side and overhead for comfortable entry.
How much clearance do I need around the garage door opening?
Proper clearance around the garage door opening is essential for hardware installation and vehicle safety. Side clearance (also called sideroom) typically needs at least 3.75 inches on each side of the door for standard track installation, though some low-headroom systems require up to 5.5 inches. Headroom above the door (the distance from the top of the opening to the ceiling) needs at least 10 to 12 inches for standard extension or torsion spring systems, and 15 inches or more is preferred for torsion springs. Backroom (the depth from the opening to the back wall) must accommodate the door when open, generally equal to the door height plus 18 inches. For vehicle clearance through the opening, maintain at least 6 inches on each side and 6 inches overhead.
Can I get a custom-sized garage door?
Yes, custom-sized garage doors are available from most major manufacturers, though they cost 30 to 100 percent more than standard sizes and have longer lead times of 4 to 8 weeks. Standard sizes are typically available in width increments of 1 foot (8, 9, 10, 12, 14, 16, 18 feet) and height increments of 1 foot (7, 8, 9, 10, 12 feet). Custom doors can be made in virtually any size up to about 24 feet wide and 20 feet tall. Before ordering a custom size, consider whether adjusting the rough opening to fit a standard door might be more cost-effective. Framing modifications to accommodate a standard door often cost less than the premium for a custom door. However, for unusual openings in historic homes or unique architectural designs, custom is sometimes the only option.
What type of garage door opener do I need for different door sizes?
The garage door opener must be matched to the door size and weight. Standard single doors (8-10 feet wide, under 200 pounds) work well with 1/2 horsepower chain-drive or belt-drive openers. Double doors (14-18 feet wide, 250-400 pounds) generally require 3/4 to 1 horsepower openers. Heavy wooden carriage doors or insulated steel double doors may need 1 to 1.25 horsepower units. Commercial or oversized doors often require specialized jackshaft or hoist operators. Belt-drive openers are quieter than chain-drive models, making them preferable for garages with living space above. Wall-mounted jackshaft openers are ideal when ceiling space is limited or when you want maximum overhead clearance for tall vehicles.