E Bike Range Calculator
Free Bike range Calculator for cycling. Enter your stats to get performance metrics and improvement targets. Enter your values for instant results.
Formula
Range = (Battery Wh / Power Draw) x Speed
Range is calculated by dividing battery capacity (Wh) by total electrical power consumption (watts), giving hours of assist, then multiplying by average speed. Power draw depends on motor assist level, terrain, rider weight, and motor efficiency.
Worked Examples
Example 1: Standard Commuter E-Bike Range
Problem: A 500 Wh / 36V e-bike with 250W motor, 80 kg rider, 22 kg bike, medium assist at 25 km/h on flat terrain. Estimate range.
Solution: Amp-hours = 500 / 36 = 13.9 Ah\nMotor power draw at medium (60%) = 250 x 0.60 = 150W\nAdjusted for motor efficiency (80%) = 150 / 0.80 = 187.5W\nWith flat terrain factor (1.0) + 5W electronics = 192.5W\nHours of assist = 500 / 192.5 = 2.6 hours\nRange = 2.6 x 25 = 65 km (40 miles)
Result: Range: 65 km (40 miles) | Ride Time: 2.6 hours | Charge Cost: $0.075
Example 2: Mountain E-Bike Hilly Terrain
Problem: Same e-bike on hilly terrain using high assist. How does range compare?
Solution: Motor power at high (80%) = 250 x 0.80 = 200W\nAdjusted for efficiency = 200 / 0.80 = 250W\nHilly terrain factor (1.7) = 250 x 1.7 = 425W + 5W = 430W\nHours of assist = 500 / 430 = 1.16 hours\nRange at 25 km/h = 1.16 x 25 = 29 km (18 miles)\nRange reduction vs flat/medium: 55%
Result: Range: 29 km (18 miles) | Ride Time: 1.2 hours | 55% less than flat/medium
Frequently Asked Questions
How is e-bike range calculated and what factors affect it most?
E-bike range is calculated by dividing the battery capacity in watt-hours by the average electrical power consumption in watts, then multiplying by average speed. The most important factors affecting range are battery capacity, assist level selected, terrain, rider weight, wind conditions, and tire type. A 500 Wh battery on eco assist over flat terrain might provide 100 km of range, while the same battery on turbo mode in hilly terrain might only deliver 30 km. Rider pedal input also matters significantly because e-bikes amplify human power rather than replacing it entirely. A rider who pedals harder requires less motor assistance for the same speed, extending range. Temperature also affects battery capacity, with cold weather reducing usable capacity by 10 to 30 percent.
How do different assist levels affect e-bike range?
Assist levels control what percentage of the motor maximum power is available for pedal assistance, directly impacting battery drain and range. Eco mode typically uses 25 to 35 percent of motor capacity, providing gentle assistance that maximizes range, often achieving 80 to 120 km on a 500 Wh battery. Tour or low mode uses 40 to 50 percent, offering a balance of assistance and range. Sport or medium mode uses 55 to 70 percent, providing strong assistance for moderate hills with moderate range reduction. Turbo or high mode uses 80 to 100 percent of motor power, delivering maximum assistance but cutting range to 30 to 50 percent of eco mode levels. Most riders find that medium assist provides the best balance between fun riding experience and practical range for daily commuting and recreational riding.
How does terrain and elevation gain affect e-bike range?
Terrain has a dramatic effect on e-bike range because climbing hills requires the motor to work against gravity, which consumes energy far faster than flat riding. On flat terrain, a 500 Wh battery might provide 80 km of range at medium assist. Rolling hills with 500 meters of total climbing reduce this to approximately 55 to 65 km. Mountainous terrain with 1000 or more meters of climbing might cut range to 35 to 45 km. The total elevation gain matters more than the gradient of individual hills because cumulative climbing determines total gravitational energy expenditure. Some e-bikes with regenerative braking can recover 5 to 10 percent of energy on descents, slightly extending range in hilly terrain. Planning routes with less elevation gain is the most effective way to extend range beyond changing assist levels.
How does rider weight affect e-bike range and performance?
Rider weight affects e-bike range through increased rolling resistance and greatly increased energy demand on hills. On flat ground, a 20 kg increase in rider weight reduces range by approximately 5 to 8 percent due to higher rolling resistance. On hilly terrain, the same weight increase can reduce range by 15 to 25 percent because gravitational power demand scales linearly with total system mass. A 100 kg rider on a 25 kg e-bike climbing a 5 percent grade requires about 20 percent more power than a 75 kg rider on the same bike. Most e-bike manufacturers specify range estimates based on an 80 kg total rider weight with clothing and cargo. Riders significantly above or below this weight should adjust expected range accordingly. Carrying cargo or a child further increases system weight and reduces range proportionally.
How long does an e-bike battery last and how do I maximize its lifespan?
Modern lithium-ion e-bike batteries typically last 500 to 1000 charge cycles before capacity drops to 80 percent of original. At 80 km per charge, that translates to 40,000 to 80,000 km of total lifetime riding. To maximize battery lifespan, avoid storing the battery fully charged or fully depleted for extended periods. The ideal storage charge level is between 30 and 70 percent. Avoid extreme temperatures during both use and storage, as heat above 35 degrees Celsius and cold below minus 10 accelerate degradation. Use the manufacturer-supplied charger and avoid fast charging when possible because slower charging reduces heat and stress on battery cells. Avoid regularly draining the battery to zero percent, as deep discharges stress the cells more than partial cycles. A battery that is regularly charged from 20 to 80 percent will outlast one that is consistently charged from 0 to 100 percent.
How much does it cost to charge an e-bike battery?
Charging an e-bike battery is remarkably inexpensive compared to fueling a car or even public transportation. A typical 500 Wh battery charged from empty to full consumes about 0.6 kWh of electricity when accounting for charger inefficiency. At an average electricity cost of 0.15 USD per kWh, a full charge costs approximately 0.09 USD or about 9 cents. This provides 50 to 100 km of range depending on conditions, resulting in a cost of roughly 0.1 to 0.2 cents per kilometer. For comparison, a fuel-efficient car costs approximately 5 to 8 cents per kilometer in fuel. Over a year of daily 20 km commuting, e-bike electricity costs total about 15 to 25 USD, compared to 400 to 600 USD for the same distance by car. The equivalent fuel economy of an e-bike exceeds 1000 miles per gallon gasoline equivalent.