Contact Lens Calculator
Use our free Contact lens Calculator to get personalized health results. Based on validated medical formulas and clinical guidelines.
Formula
Fc = Fg / (1 - d x Fg)
Where Fc = contact lens power in diopters, Fg = glasses (spectacle) prescription power in diopters, and d = vertex distance in meters (typically 0.012 m). For myopic prescriptions, the contact lens power will be weaker (less negative). For hyperopic prescriptions, it will be stronger (more positive). Adjustment is significant for powers above 4.00 D.
Worked Examples
Example 1: Myopic Conversion with Vertex Distance
Problem: Glasses prescription: Right -5.50, Left -4.75. Vertex distance 12mm. Convert to contact lens powers.
Solution: Right Eye: Fc = -5.50 / (1 - 0.012 x (-5.50))\nFc = -5.50 / (1 + 0.066) = -5.50 / 1.066 = -5.16 D\nRounded to nearest 0.25: -5.25 D\n\nLeft Eye: Fc = -4.75 / (1 - 0.012 x (-4.75))\nFc = -4.75 / (1 + 0.057) = -4.75 / 1.057 = -4.49 D\nRounded to nearest 0.25: -4.50 D\n\nDifference: Right 0.25 D weaker, Left 0.25 D weaker in contacts
Result: Contact Lens Rx: Right -5.25 D | Left -4.50 D (both slightly weaker than glasses)
Example 2: Toric Lens Assessment
Problem: Glasses: Right -6.00 / -1.50 x 180, Left -5.25 / -0.50 x 90. Determine if toric lenses are needed.
Solution: Right Eye: Cylinder = -1.50 D (above 0.75 threshold, toric needed)\nConverted Sphere: -6.00 / (1 - 0.012 x (-6.00)) = -5.58 D, rounded to -5.50 D\nSpherical Equivalent option: -5.50 + (-1.50/2) = -6.25 D (but astigmatism too high)\n\nLeft Eye: Cylinder = -0.50 D (below 0.75 threshold, spherical OK)\nConverted Sphere: -5.25 / (1 - 0.012 x (-5.25)) = -4.93 D, rounded to -5.00 D\nSpherical Equivalent: -5.00 + (-0.50/2) = -5.25 D (acceptable)\n\nRecommendation: Toric lens for right eye, spherical for left eye
Result: Right: Toric -5.50 / -1.50 | Left: Spherical -5.25 (SE) or -5.00 spherical
Frequently Asked Questions
Why is my contact lens prescription different from my glasses prescription?
The primary reason is vertex distance, which is the gap between your glasses lenses and the surface of your eyes, typically about 12 millimeters. Because glasses sit away from your eye, the effective power of the lens changes compared to a contact lens that sits directly on the cornea. For prescriptions stronger than plus or minus 4.00 diopters, this difference becomes clinically significant and the contact lens power must be mathematically adjusted using the vertex distance formula. A glasses prescription of -6.00 might convert to approximately -5.50 in contacts because the lens is closer to the eye. Contact lens prescriptions also include additional parameters like base curve and diameter that are specific to the physical fit of the lens on your cornea.
What is base curve and why does it matter for contact lenses?
Base curve (BC) is the radius of curvature of the back surface of a contact lens, measured in millimeters. It determines how the lens fits on the curvature of your cornea. A typical base curve ranges from 8.0 to 9.0 mm, with most lenses available in 8.4 or 8.6 mm. A flatter cornea requires a larger (flatter) base curve number, while a steeper cornea needs a smaller (steeper) base curve. If the base curve is too flat for your eye, the lens will move excessively, causing blurred vision and discomfort. If it is too steep, the lens will be too tight, restricting oxygen flow and potentially causing corneal damage. Your eye care provider determines the correct base curve using a keratometer or corneal topographer during a contact lens fitting examination.
What are toric contact lenses and when are they needed?
Toric contact lenses are specially designed to correct astigmatism, which occurs when the cornea has an irregular shape with different curvatures along different meridians. Unlike regular spherical contact lenses that have the same power throughout, toric lenses have different powers in different zones of the lens to compensate for the uneven corneal curvature. They also have a stabilization mechanism, usually prism ballast or thin zones, that keeps the lens from rotating on the eye so the astigmatism correction stays aligned with the proper axis. Toric lenses are typically recommended when the cylinder correction is 0.75 diopters or more. Below this threshold, a spherical lens using the spherical equivalent power often provides adequate vision. Toric lenses are more expensive than spherical lenses and come in fewer parameter combinations.
What is the difference between daily, biweekly, and monthly contact lenses?
Daily disposable contact lenses are worn once and discarded at the end of the day, offering the highest level of hygiene and convenience with no cleaning required. They are ideal for people with allergies, dry eyes, or occasional wear needs, though the per-box cost is higher. Biweekly (two-week) lenses are designed to be worn daily and removed each night for cleaning and disinfection, then replaced every 14 days. Monthly lenses follow the same daily wear and nightly cleaning routine but are replaced every 30 days, making them the most economical option. Some monthly lenses are also approved for extended or continuous wear, meaning they can be slept in for up to 30 nights, though this increases the risk of corneal infections. The choice depends on your lifestyle, budget, eye health, and how frequently you plan to wear contacts.
How does oxygen transmissibility affect contact lens health?
Oxygen transmissibility, measured as Dk/t (where Dk is the oxygen permeability of the material and t is the lens thickness), indicates how much oxygen can pass through the contact lens to reach the cornea. The cornea has no blood vessels and relies entirely on atmospheric oxygen dissolved in the tear film. When a contact lens restricts oxygen flow, it can cause corneal edema (swelling), neovascularization (blood vessel growth into the cornea), and increased risk of infection. Modern silicone hydrogel materials achieve Dk/t values of 100 to 175, roughly five to six times higher than traditional hydrogel materials (Dk/t 20 to 40). The FDA recommends a minimum Dk/t of 24 for daily wear and 87 for overnight wear. Higher-power lenses are thicker and therefore transmit less oxygen, making silicone hydrogel materials especially important for strong prescriptions.
What is lens diameter and how does it affect contact lens fit?
Contact lens diameter is the overall width of the lens measured in millimeters, typically ranging from 13.8 to 14.5 mm for soft contact lenses. The diameter must be larger than the cornea (which averages about 11.5 to 12 mm) to ensure the lens edge rests on the sclera (white of the eye) and provides stable coverage. A larger diameter provides more lens stability and is less likely to decenter during eye movements or blinking. However, a diameter that is too large can cause the lens to impinge on the blood vessels at the limbus (the border between cornea and sclera), reducing oxygen supply and causing redness. Rigid gas-permeable lenses use smaller diameters of 8.5 to 10.0 mm and sit on the cornea only. Your eye care provider selects the appropriate diameter based on your corneal diameter, eyelid position, and tear film characteristics.