Skip to main content

Canning Yield Calculator

Calculate how many jars you will get from a given amount of fresh produce for canning. Enter values for instant results with step-by-step formulas.

Share this calculator

Formula

Total Jars = (Fresh Pounds x (1 - Prep Loss)) / Pounds Per Jar

Where Fresh Pounds is the starting weight of raw produce, Prep Loss accounts for peeling, coring, husking, and trimming waste as a percentage, and Pounds Per Jar is the amount of prepared produce needed to fill one jar of the selected size.

Worked Examples

Example 1: Canning 20 Pounds of Tomatoes

Problem: You have 20 lbs of fresh tomatoes and want to can them in quart jars. How many jars will you get?

Solution: Prep loss for tomatoes: 10% (coring, peeling)\nUsable weight: 20 x 0.90 = 18 lbs\nLbs per quart: 3.0 lbs\nTotal jars: 18 / 3.0 = 6 quart jars\nLeftover: 0 lbs\nProcessing: Water bath, 45 min per batch\nSupply cost: 6 jars x $1.25 + 6 lids x $0.30 = $9.30

Result: 6 quart jars | Water bath processing | $9.30 in supplies | ~2 hours total time

Example 2: Corn Canning from Fresh Ears

Problem: You have 25 lbs of corn on the cob. How many pint jars of corn kernels can you produce?

Solution: Prep loss for corn: 55% (cobs, husks, silk)\nUsable weight: 25 x 0.45 = 11.25 lbs kernels\nLbs per pint: 4.5 x 0.5 = 2.25 lbs\nTotal jars: 11.25 / 2.25 = 5 pint jars\nProcessing: Pressure canner required (low acid), 85 min per batch\nSupply cost: 5 x $1.00 + 5 x $0.30 = $6.50

Result: 5 pint jars | Pressure canner required | $6.50 in supplies | ~3 hours total

Frequently Asked Questions

How many pounds of produce do I need per jar when canning?

The amount of fresh produce needed per jar varies significantly by food type and jar size. For quart jars, general guidelines are roughly 3 pounds of tomatoes, 2.5 pounds of peaches or pears, 2 pounds of green beans, and 4.5 pounds of corn on the cob to yield kernels. These numbers account for the usable portion after preparation losses like peeling, coring, and trimming. Pint jars require approximately half these amounts, while half-pint jars need about one quarter. Always purchase 10 to 15 percent more produce than the calculated minimum to account for varying sizes, bruised spots, and under-ripe pieces that may need to be discarded during preparation.

What is the difference between water bath and pressure canning?

Water bath canning and pressure canning are two fundamentally different preservation methods suited for different food types based on their acidity levels. Water bath canning heats jars to 212 degrees Fahrenheit, the boiling point of water, which is sufficient to destroy molds, yeasts, and some bacteria in high-acid foods with a pH below 4.6. This method works for fruits, jams, jellies, pickles, and tomatoes with added acid. Pressure canning reaches temperatures of 240 to 250 degrees Fahrenheit under pressure, which is necessary to destroy Clostridium botulinum spores in low-acid foods like vegetables, meats, and soups. Using the wrong method for a food type can result in dangerous botulism contamination.

Can I reuse canning jars and lids from year to year?

Standard Mason-type canning jars can be reused many times as long as they remain free of chips, cracks, or scratches on the rim that could prevent a proper seal. Always inspect jar rims carefully before each use by running your finger along the edge to feel for nicks. However, standard flat metal canning lids with the sealing compound should only be used once because the sealing compound deforms during the first use and cannot create a reliable vacuum seal a second time. Metal screw bands can be reused if they are not rusted or bent. Some newer reusable lid systems like Tattler lids are designed for multiple uses, though they require slightly different techniques for proper sealing.

What common mistakes should beginners avoid when canning?

The most critical mistake beginners make is using untested recipes or modifying tested recipes, which can alter acidity levels and create conditions favorable to botulism growth. Always use recipes from trusted sources like the USDA Complete Guide to Home Canning or the Ball Blue Book. Other common errors include failing to properly sterilize equipment, not removing air bubbles from packed jars before sealing, over-tightening or under-tightening screw bands, and processing for insufficient time. Altitude adjustments are frequently overlooked as well, since water boils at lower temperatures at higher elevations, requiring longer processing times or higher pressure settings. Starting with high-acid foods like jams and pickles is recommended before attempting low-acid pressure canning.

How much money does home canning actually save?

Home canning economics depend heavily on whether you grow your own produce, buy in bulk at farmers markets, or purchase from grocery stores. Using home-grown tomatoes, the cost per quart of canned tomatoes can be as low as 0.50 to 0.75 dollars including jar lids and energy costs, compared to 2.50 to 4.00 dollars for store-bought organic canned tomatoes. Buying in-season bulk produce from local farms or U-pick operations typically yields savings of 30 to 50 percent versus buying canned goods year-round. However, if you factor in your time at minimum wage, the financial advantage shrinks considerably. Most experienced home canners cite quality control, food security, avoiding preservatives, and the satisfaction of self-sufficiency as equally important motivations.

What equipment do I need to start canning at home?

For water bath canning, the essential equipment includes a large stockpot or dedicated water bath canner with a lid and jar rack, Mason jars in your preferred sizes, new flat lids and screw bands, a jar lifter for safely handling hot jars, a lid wand or magnetic lid lifter, a bubble remover and headspace tool, and a wide-mouth funnel for filling jars cleanly. For pressure canning, you will need a dedicated pressure canner with an accurate gauge, which costs between 75 and 200 dollars. Additional helpful supplies include a canning timer, clean towels, labels, and a reliable food scale. A complete beginner water bath setup costs approximately 50 to 80 dollars including jars, while adding a pressure canner brings the total to 150 to 250 dollars.

References