Binomial Probability Calculator
Solve binomial probability problems step-by-step with our free calculator. See formulas, worked examples, and clear explanations.
Formula
P(X=k) = C(n,k) * p^k * (1-p)^(n-k)
Where n is the number of independent trials, k is the number of successes, p is the probability of success on each trial, and C(n,k) is the binomial coefficient (n choose k). The formula multiplies the number of ways to arrange k successes among n trials by the probability of any specific arrangement.
Worked Examples
Example 1: Coin Flip Probability
Problem: What is the probability of getting exactly 6 heads in 10 fair coin flips?
Solution: n = 10 trials, k = 6 successes, p = 0.5\n\nP(X = 6) = C(10,6) x 0.5^6 x 0.5^4\nC(10,6) = 10! / (6! x 4!) = 210\nP(X = 6) = 210 x 0.015625 x 0.0625\nP(X = 6) = 210 x 0.000977\nP(X = 6) = 0.2051 or 20.51%\n\nCumulative P(X <= 6) = 0.8281 or 82.81%
Result: P(exactly 6 heads) = 20.51%, P(6 or fewer heads) = 82.81%
Example 2: Quality Control Defect Analysis
Problem: A factory has a 3% defect rate. In a sample of 50 items, what is the probability of finding exactly 2 defective items?
Solution: n = 50 trials, k = 2 successes (defects), p = 0.03\n\nP(X = 2) = C(50,2) x 0.03^2 x 0.97^48\nC(50,2) = 1225\n0.03^2 = 0.0009\n0.97^48 = 0.2281\n\nP(X = 2) = 1225 x 0.0009 x 0.2281\nP(X = 2) = 0.2515 or 25.15%\n\nMean defects expected: 50 x 0.03 = 1.5
Result: P(exactly 2 defects) = 25.15%, Expected defects = 1.5
Frequently Asked Questions
What is the binomial probability distribution?
The binomial probability distribution models the number of successes in a fixed number of independent trials, where each trial has exactly two possible outcomes (success or failure) with a constant probability of success. It is one of the most fundamental discrete probability distributions in statistics. For example, flipping a fair coin 10 times and counting heads follows a binomial distribution with n equals 10 and p equals 0.5. The distribution requires three conditions: a fixed number of trials, independent trials, and a constant probability of success. The shape of the distribution depends on both n and p, ranging from right-skewed when p is small to left-skewed when p is large to symmetric when p equals 0.5.
How is the binomial probability formula calculated?
The binomial probability formula calculates the exact probability of getting exactly k successes in n trials: P(X equals k) equals C(n,k) times p raised to the k times (1 minus p) raised to the (n minus k). Here, C(n,k) is the binomial coefficient representing the number of ways to choose k items from n items, calculated as n factorial divided by k factorial times (n minus k) factorial. The term p to the k represents the probability of k successes occurring, and (1 minus p) to the (n minus k) represents the probability of the remaining trials being failures. The binomial coefficient accounts for all possible orderings of successes and failures within the n trials.
What is the difference between PMF and CDF in binomial distribution?
The Probability Mass Function (PMF) gives the probability of getting exactly a specific number of successes, while the Cumulative Distribution Function (CDF) gives the probability of getting at most that number of successes. The PMF answers questions like 'what is the probability of exactly 3 heads in 10 flips' while the CDF answers 'what is the probability of 3 or fewer heads in 10 flips.' The CDF is calculated by summing all PMF values from 0 up to and including the target value. The complement of the CDF (1 minus CDF) gives the probability of getting more than that number of successes. Both functions are essential for hypothesis testing, quality control, and risk assessment in statistics.
What are the conditions for using the binomial distribution?
Four conditions must be satisfied for the binomial distribution to apply. First, there must be a fixed number of trials (n) determined before the experiment begins. Second, each trial must have exactly two possible outcomes, conventionally called success and failure. Third, the probability of success (p) must remain constant from trial to trial. Fourth, the trials must be independent, meaning the outcome of one trial does not affect any other trial. If these conditions are violated, other distributions may be more appropriate: the hypergeometric distribution for sampling without replacement, the negative binomial for variable trial counts, or the multinomial distribution for more than two outcomes per trial.
What do the mean and standard deviation of a binomial distribution tell us?
The mean (expected value) of a binomial distribution equals n times p, representing the average number of successes you would expect over many repetitions of the experiment. For 100 coin flips with a fair coin, the expected number of heads is 50. The standard deviation equals the square root of n times p times (1 minus p), measuring the typical spread of results around the mean. For those 100 coin flips, the standard deviation is about 5, meaning most outcomes will fall between 45 and 55 heads. Together, the mean and standard deviation define the center and spread of the distribution. As n increases, the distribution becomes more bell-shaped and can be approximated by a normal distribution.
How is the binomial distribution used in quality control?
Quality control extensively uses the binomial distribution to make accept or reject decisions about product batches. In acceptance sampling, inspectors test a random sample of n items from a batch and count the number of defective items. If the defect count exceeds a predetermined threshold (the acceptance number), the entire batch is rejected. The binomial distribution calculates the probability of finding a certain number of defects given the true defect rate. Operating Characteristic curves, which plot the probability of accepting a batch versus the true defect rate, are based on binomial probabilities. Control charts for attribute data (p-charts and np-charts) use binomial distribution properties to set control limits and detect process shifts.